Banca de DEFESA: JOSÉ JAIME GUIMARÃES PEIXOTO NETO

Uma banca de DEFESA de DOUTORADO foi cadastrada pelo programa.
STUDENT : JOSÉ JAIME GUIMARÃES PEIXOTO NETO
DATE: 20/07/2022
TIME: 09:00
LOCAL: https://meet.google.com/okv-mtxe-gqf
TITLE:

Frequency Selective Surfaces of the Type Absorb/Transmit Broadband

KEY WORDS:

Frequency Selective Surfaces, Absorbers, Multilayer, Broadband

PAGES: 70
BIG AREA: Engenharias
AREA: Engenharia Elétrica
SUBÁREA: Telecomunicações
SPECIALTY: Teoria Eletromagnetica, Microondas, Propagação de Ondas, Antenas
SUMMARY:

Frequency Selective Surfaces (FSS) are increasingly being used in telecommunications systems due to the numerous advantages presented by this type of structure, among them the low cost, ease of fabrication and low profile. As well as frequency selective surfaces, electromagnetic wave absorbers have also been widely used, mainly with the objective of solving the problem of multiple paths. Absorbers are structures that aim to absorb electromagnetic waves in a certain frequency range, while allowing the passage of these waves outside it. Thus, this work proposes to investigate the use of FSS, for the design of multilayer absorbers, to obtain broadband absorption. The study consists of the application of resistive-type FSS combined with conductive-type FSS, which use square turns as unit cell geometry, to design an absorb/transmit structure with broadband-type frequency response. The proposed structure should operate in the frequency range between 2 GHz and 6 GHz. An extensive parametric analysis was performed to optimize the desired response. At the end of this analysis, two resistive and two conductive FSS were designed and cascaded to obtain the desired bandwidth. The analyzes showed that the broadband absorber has polarization independence and angular stability. The results obtained show that the absorber presents angular stability up to 30◦. Furthermore, experimental results show that the proposed structure can absorb signals in a frequency range from 2.4 to 6.13 GHz. Absorption above 80% occurs over the entire proposed frequency range. The structure can absorb signals for the entire ISM band (2.4 – 2.4835 GHz), 5G at 3.5 GHz and UNII (5 – 6 GHz), without blocking the other frequencies, avoiding multiple paths in the vicinity where the absorber it's installed.

COMMITTEE MEMBERS:
Presidente - 2524053 - ANTONIO LUIZ PEREIRA DE SIQUEIRA CAMPOS
Interno - 1422265 - JOSE PATROCINIO DA SILVA
Externo ao Programa - 1840342 - MARCIO EDUARDO DA COSTA RODRIGUES - UFRNExterno à Instituição - ALFREDO GOMES NETO - IFPB
Externo à Instituição - MAURICIO WEBER BENJÓ DA SILVA - UFF